Pool edge system Finnland II


Pool edge system Finnland II

A classic rethought

The further development of the international classic Finland can also be used universally. One key difference is represented by the sloped grooved stone. Its wedge-shaped profile decisively facilitates production of the concrete construction and the top of the pool wall can be designed horizontally. The slope towards the pool is provided by the grooved stone. Here too, reduced wave rebound and the higher water level ensure increased pleasure while swimming in and leaving the pool. The moulded parts 500 mm in length are also of advantage for Finland II as they reduce the number of joints. Instead of the standard cover gratings made of plastic, ceramic channel covers can also be used for private pools.


Room for details



System Solution

Pool edge system Finnland II
  1. UW-Silicone
  2. Closed-cell polyethylene foam round lace
  3. Elastic water-resistant filling material
  4. Joint band
  5. Slide bearing
  6. Plastic cover grating
  7. Capillary barrier / grouting (reaction resin filler)
  8. Waterproof concrete (according to DIN EN 206/DIN 1045/DAfStB WU Guideline
  9. Conventional thick-bed laying
  10. Thin-bed laying on cement render (P III, CS IV without added lime)
  11. Sealing layer
  12. Sealing tape
  13. “Silent W 2000” outlet valve
  14. “Silent 100” outlet valve
  15. Epoxi for joints, for the project sector
  16. Section stoneware pipe
  17. Casing for water inlet/outlet pipe and brazing collar
Pool edge system Finnland II
Pool edge system Finnland II
Pool edge system Finnland II

Article overview

All articles of this series

Choose product
    Reset all filters
  1. Product type
  2. Format | Nominal size
  3. Color

At this position a product is displayed as soon as you have selected all criteria in the product filter on the left. Not yet selected filter criteria are marked with a

- symbol.

Set your personal selection or start with our preselection here.