Ceramic on the outside, carbon concrete at the core

Our new prefabricated components for the renovation of ageing pool heads ensure extremely simple and time-saving construction processes. In addition, they enable durable and resource-efficient and therefore sustainable refurbishment solutions.

Just how important the refurbishment of outdoor pools is to the German government is demonstrated by the "Refurbishment of municipal facilities in the areas of sport, youth and culture" funding program set up by Construction Minister Klara Geywitz. 476 million in funding was allocated from the 2022 budget alone. To date, a total of 148 municipal projects are to be renovated in a climate-friendly manner with the funds from this program - in the area of swimming pools, the majority of the funding is allocated to outdoor pools.

„

We need to renovate swimming pools instead of closing them

– Klara Geywitz, Federal Minister for Housing, Urban Development and Construction

Our solution:

In collaboration with CARBOCON, Agrob Buchtal developed a completely new solution for the refurbishment of pool heads: a pool head completely prefabricated with tiles and a core of carbon-reinforced concrete.

The prefabrication of the pool heads under controlled and quality-monitored workshop conditions enables energy- and resource-efficient production processes and minimized waste quantities - and a product quality that cannot be achieved on construction sites. However, the construction processes on site are also much simpler with the prefabricated parts, as complicated work steps and the involvement of many different trades are no longer necessary. The overall construction time is also reduced because there is no need to form, pour and dry the in-situ concrete. To further improve the carbon footprint, we rely on short delivery routes and use reusable formwork to produce the precast elements.

The advantages at a glance

slim, comparatively light carbon concrete construction
short construction site times (no enclosure and heating)
factory-made, quality-monitored prefabrication guarantees durable solutions in outdoor pools
material-saving concrete cross-section (cement/sand)
High-strength, durable concrete formulation (C50/60, XC4, XF3)
energy improvement through XPS insulation core
Energy saving and waste reduction thanks to prefabricated components

BASIN HEADS AS CERAMIC COMPONENTS

Quick and easy installation

1. removal of the old pool heads

In order to be able to install the prefabricated parts, which are usually 2.5 m long, the old pool heads, regardless of manufacturer or type, are first sawn out of the pool edge. The result is precise horizontal and vertical cut edges, ...

2. fitting the new bowl heads

... onto which - after pre-treatment of the cut steel reinforcement and sealing of the cut surface - the new prefabricated basin heads are simply placed in mortar. The position of existing channel drains is measured on a project-specific basis and taken into account during the production of the prefabricated parts.

3. connection to the pool surround and to the pool tiles

Finally, the connection work to the pool surround (e.g. capillary barrier) and to the pool tiles is carried out. As the transition to the existing pool tiles - if these are retained - is well below the water level, any differences in the color of the tiles and joints are barely noticeable, so that the pool head and pool appear as a unit as before.