Details for series "Eladuct + KerAion Ela 10.6" / article...

Eladuct und KerAion ELA 10.6

Conductive flooring

These two specific solutions – as a stoneware tile (Eladuct) on the one hand and as a ceramic large-size panel in model size 60 x 60 cm, 24 x 24 in, on the other (ELA 10.6) – are suitable for use in those areas where electrostatic charge requires a conductive floor covering or where the latter is recommended. The special laying instructions must be followed carefully. We shall be delighted to advise you and to give you assistance for individual applications.

Eladuct

Unglazed surfaces

Eladuct is especially predestined for those areas where the discharge of static electricity is desired together with the advantages of an unglazed surface (high mechanicalchemical stress resistance).

Examples: gravure and flexographic printing areas, laboratories, rooms for lacquer production, processing and decanting, munitions dumps, chemical production plants etc. "

KerAion ELA 10.6

Glazed surfaces

KerAion ELA 10.6 is recommended for those areas where the discharge of static electricity is desired and importance is attached to the advantages of a glazed surface (e.g. very easy to clean) and a generous, representative look.

Examples: office rooms, production rooms for electronic equipment, physical measuring and work rooms, laboratories, rooms for microchip and computer manufacture, medical areas (e.g. operating theatres), telecommunication workshops, sales areas for electronic equipment etc."

Article overview

Series Eladuct + KerAion Ela 10.6

Back

Product 355S-4035

Eladuct + KerAion Ela 10.6

Cove skirtings | static electricity non-conducting
Static electricity conducting ceramic panels
12.5 x 25 cm | 5 x 10 inch
R10

Color: 355S Eladuct unglazed

Color + Optic
- Color
  
  355S Eladuct unglazed
- Optic
  
  plain
- Glaze
  
  unglazed
- Surface structure
  
  smooth
- Degree of surface gloss
  
  matt

Dimensions
- Format | Nominal size
  
  12.5 x 25 cm
  5 x 10 inch
- Work size
  
  125/9 x 240 x 11 mm
- Material thickness
  
  11 mm
- Joint width recommendation
  
  10 mm
- Model number
  
  4035
- Rectified
  
  not

Features
- Wall | Floor
  
  Floor, Wall
- Indoor | Outdoor
  
  Indoor, Outdoor
- Resistance to frost
  
  Yes
- Slip-resistant
  
  R10
- Finishing
  
  without

Product norm
- AI b UGL, Extruded Ceramic Tiles, Precision, DIN EN 14411, group AIb, unglazed (UGL) for floor coverings in indoor and outdoor areas (static electricity conducting stoneware tiles)

Price + logistic data
- Price group
  
  A467
- Price group unit
  
  pieces
- pieces per m
  
  4.000
- kg per m
  
  3.916
- pieces per bundle
  
  16.000
- running meter per bundle
  
  4.000
- kg per bundle
  
  15.664

Further product information
- Color differences & deviations: Color deviations must be accepted and are no reason for complaint.
- Product information: In the case of Eladuct, static electricity is discharged through the tile body.
  The Eladuct series is classified as dissipative according to test standard EN 1081/Method A (electrical resistance between 10⁶ ohms and 10⁹ ohms) and is suitable for the production of electrostatically dissipative flooring in accordance with TRBS 2153 (prevention of ignition hazards due to electrostatic charges).
  Specific values regarding the dissipative properties are available upon request in the form of a batch-related test certificate.
  The 355s is defined by the contact resistance and not by the color setting. Color deviations must be accepted and are no reason for complaint

Downloads

To the article overview Eladuct + KerAion Ela 10.6